Hexagonal counterflow core
Hexagonal counterflow plastic plate exchangers deliver up to 90% thermal efficiency.
SenseAir
New-generation residential heat recovery with EC fans, Wi-Fi app control and up to 90% efficiency.
- 0%thermal efficiency, up to
- 0m³/hairflow, SenseAir HV
- 0automatic operating modes
- ECmotor-driven fans
01Overview
Smart ventilation
for modern homes.
The SenseAir series features a new-generation EPP body with high thermal insulation and an extremely lightweight structure for easy installation.
The SenseAir HV model covers airflow requirements up to 375 m³/h, and comes standard with a G4 filter, bypass damper, and temperature and humidity sensors.
EC motor fans
High performance with low energy consumption and quiet operation.
Lightweight EPP body
New-generation EPP body design with high thermal insulation.
Flexible installation
Vertical or horizontal, left or right — adjustable air directions in a single unit.
Plug-and-play
G4 filter, bypass damper and temperature and humidity sensors as standard.
Wi-Fi & ModBus
Control by Wi-Fi and mobile app; ModBus for building automation integration.
02Operating modes
Four modes,
switched automatically.
SenseAir adapts to the season and the room — recovering heat, cooling for free, boosting against humidity and protecting itself from frost.
Heat recovery
Supply and extract air pass through the hexagonal counterflow exchanger, recovering up to 90% of the heat that would otherwise be lost.
At a glance
Free cooling
When the indoor–outdoor temperature difference is minimal in seasonal transitions, the internal bypass damper opens so fresh air enters without passing through the exchanger.
At a glance
Humidity boost
The built-in humidity sensor switches the unit to Boost when the preset level is reached, raising fan speed to prevent moisture build-up.
At a glance
Defrost
Below 0 °C outdoors, fan speeds are optimised to prevent internal icing. For extended freezing conditions an electric pre-heater is recommended.
At a glance
03Specifications
Technical overview.
- Series
- SenseAir — residential heat recovery
- Model
- SenseAir HV
- Airflow
- Up to 375 m³/h (≈ 220 CFM)
- Heat exchanger
- Hexagonal counterflow plastic plate
- Thermal efficiency
- Up to 90%
- Fans
- EC motor-driven
- Body
- New-generation EPP, high thermal insulation, lightweight
- Installation
- Vertical / horizontal, left / right in one unit
- Standard equipment
- G4 filter, bypass damper, temperature and humidity sensors
- Operating modes
- Heat recovery, free cooling, humidity boost, defrost
- Controls
- Wi-Fi with mobile app · ModBus
- Options
- Additional sensors and functional modules; electric pre-heater for extended freezing
04Model data
Catalogue figures,
at a glance.
As published in the SenseAir technical catalogue.
| Model | Max. airflowm³/h | Max. thermal efficiency% | Energy class | Max. electrical powerW | Duct connectionsmm | Dimensions (L × W × H)mm | Weightkg |
|---|---|---|---|---|---|---|---|
| SenseAir | 375 | 90 | A+ | 150 | Ø160 / Ø125 | 550 × 500 × 850 | 18 |
Max. airflow at 100 Pa. 230 V AC 50 Hz, 0.7 A. Two G4 filters (F7 optional). EPP casing. Operating temperature −25 to +60 °C. The catalogue gives no sound data.
05Downloads
Everything you need
to specify SenseAir.
Complete the system
Related products.
Specify SenseAir for
your next project.
Share your drawings or requirements and our engineering team will come back with a tailored SenseAir selection.