Certified heat exchangers
Eurovent-certified cross-flow plate heat exchangers deliver a high level of heat recovery.
Superair
Ceiling-type heat recovery units with Eurovent-certified plate heat exchangers.
- 0airflow models
- 800–6,000m³/hairflow range
- 0mmdouble-skin insulation
- 0Vsingle-phase supply
01Overview
Fresh air in. Energy
kept inside.
Superair heat recovery units were developed by Technogen to meet growing demands for energy efficiency and indoor air quality — exhausting stale air while supplying fresh air, and transferring heat between the two through a plate heat exchanger.
They suit offices, hotels, restaurants, hospitals, cinemas, exhibition halls and residential buildings.
Low-noise plug fans
Backward-curved plug fans on directly coupled AC motors for low energy use and low noise.
Double-skin insulation
25 mm flame-retardant double-skin insulation throughout the casing.
Two-stage filtration
G4 filters in both fresh-air and exhaust streams, with ePM10 50% (M5) class filters.
Configurable options
Electric heaters, hot-water coils and silencers adapt each unit to the project.
Controls & BMS
Optional digital room control panels and integration with building management systems.
02How it works
Two airstreams.
Zero mixing.
Superair recovers heat from exhaust air through a cross-flow plate exchanger, so fresh air arrives pre-tempered.
- 01
Extract
Stale air is drawn from the space and passes through the plate exchanger.
- 02
Exchange
Heat transfers across the thin plates — the two airstreams never mix.
- 03
Supply
Filtered fresh air enters the space already pre-tempered.
03Range
Nine models.
One family.
From compact apartments to large projects — Superair spans 800 to 6,000 m³/h across nine airflow models.
Ranges across the nine Superair models. Data for every model is in the technical catalogue.
04Specifications
Technical overview.
- Type
- Ceiling-type heat recovery unit
- Models
- 9 airflow capacity models
- Airflow
- 800 – 6,000 m³/h (≈ 470–3,530 CFM)
- Heat exchanger
- Eurovent-certified cross-flow plate
- Fans
- Backward-curved plug fans, directly coupled AC motors
- Fan motor power
- 270 – 1,600 W
- Noise
- 57 dB(A) (TEVHR-800) · 59 dB(A) (TEVHR-6000)
- Insulation
- 25 mm flame-retardant double-skin
- Filtration
- G4 in fresh-air and exhaust streams · ePM10 50% (M5)
- Options
- Electric heater, hot-water coil, silencer
- Controls
- Optional digital room control panel, BMS integration
- Electrical
- 230 V / 50 Hz, single-phase
- Service
- User-friendly service doors, modular structure
05Model data
Catalogue figures,
at a glance.
As published in the Superair technical catalogue.
Performance
| Model | Airflowm³/h | Sound leveldB(A) | Fan powerW | Max. currentA |
|---|---|---|---|---|
| TEVHR-800 | 865 | 57 | 270 | 1.2 |
| TEVHR-1000 | 1,210 | 59 | 310 | 1.4 |
| TEVHR-1500 | 1,500 | 62 | 450 | 2.0 |
| TEVHR-2000 | 2,100 | 50 | 450 | 2.0 |
| TEVHR-2500 | 3,150 | 55 | 750 | 3.5 |
| TEVHR-3000 | 3,150 | 55 | 750 | 3.5 |
| TEVHR-4000 | 4,400 | 55 | 940 | 4.8 |
| TEVHR-5000 | 6,000 | 55 | 1,300 | 6.0 |
| TEVHR-6000 | 6,000 | 59 | 1,600 | 8.0 |
Airflow and fan power at 0 Pa external static pressure. Sound level at 250 Hz, 1.5 m from the unit. Power supply 1~230 V 50 Hz. Every model comes with rectangular (R) or circular (C) duct connections; the figures are the same.
Dimensions
| Model | Widthmm | Depthmm | Heightmm | Rectangular duct (R)mm | Circular duct Ø (C)mm | Weightkg |
|---|---|---|---|---|---|---|
| TEVHR-800 | 676 | 1,110 | 315 | 220 × 220 | 200 | 60 |
| TEVHR-1000 | 838 | 1,262 | 374 | 220 × 220 | 200 | 75 |
| TEVHR-1500 | 838 | 1,362 | 424 | 270 × 270 | 250 | 85 |
| TEVHR-2000 | 938 | 1,498 | 474 | 320 × 320 | 300 | 110 |
| TEVHR-2500 | 1,060 | 1,894 | 544 | 370 × 370 | 355 | 135 |
| TEVHR-3000 | 1,060 | 1,894 | 544 | 370 × 370 | 355 | 135 |
| TEVHR-4000 | 1,203 | 2,151 | 633 | 450 × 450 | 400 | 160 |
| TEVHR-5000 | 1,203 | 2,151 | 633 | 450 × 450 | 450 | 190 |
| TEVHR-6000 | 1,224 | 2,151 | 672 | 500 × 500 | 500 | 210 |
Width, depth and height are dimensions A, B and C of the catalogue drawing.
06Fan curves
Airflow
against pressure.
Redrawn from the curves in the Superair technical catalogue. Move along a curve to read it.
Redrawn from the fan curves on pages 8–25 of the SuperAir technical catalogue. The R (rectangular duct) and C (circular duct) versions of each model share the same curve.
07Downloads
Everything you need
to specify Superair.
Specify Superair for
your next project.
Share your drawings or requirements and our engineering team will come back with a tailored Superair selection.